394C06 | PCBセンサ・オンラインストア東陽テクニカ

Model: 394C06
Platinum Stock Product Handheld shaker, 1g at 159.2 Hz (for up to 210 grams total weight of sensor, cable and mtg. accessories).

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Operating Frequency (±1 %)	159.2 Hz
Acceleration Output (±3 %)	9.81 m/s² rms	[5]
Velocity Output	9.81 mm/s rms	[4]
Displacement Output	9.81 µm rms	[4]
Transverse Output	≤3 %
Distortion (0 to 99 grams load)	≤2 %
Distortion (100 to 149 grams load)	≤5 %
Distortion (150 to 210 grams load)	≤9 %
Maximum Load	210 gm	[1]
Automatic Switch Off Time	1.0 to 2.5 minutes	[3]
Calibration Cycles (2 gram load)	320 cycles	[2]
Calibration Cycles (25 gram load)	600 cycles	[2]
Calibration Cycles (50 gram load)	1600 cycles	[2]
Calibration Cycles (100 gram load)	400 cycles	[2]
Calibration Cycles (150 gram load)	160 cycles	[2]
Calibration Cycles (210 gram load)	80 cycles	[2]
Environmental
Temperature Range (Operating)	-10 to +55 °C
Electrical
Ramp-Up time	≤3 sec	[6]
Internal Battery (Quantity)	4
Internal Battery (Type)	AA	[7]
DC Power (±5 %)	12 VDC	[9]
DC Power	1.67 Amps	[8] [9]
Battery Life (2 gram load)	8 hours	[2]
Battery Life (25 gram load)	15 hours	[2]
Battery Life (50 gram load)	40 hours	[2]
Battery Life (100 gram load)	10 hours	[2]
Battery Life (150 gram load)	4 hours	[2]
Battery Life (210 gram load)	2 hours	[2]
Physical
Size - Diameter	56 mm
Size - Height	200 mm
Weight (with batteries)	900 gm	[6]
Mounting Thread	10-32 Female	[10] [11]
Mounting Torque (Maximum)	112 N-cm	[11]

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Maximum load includes sensor, connector and cabling.
[2] Approximate values, based on automatic switch off time and dependent on type of batteries.
[3] Unit supplied set to auto shut off; see manual for continuous use selection.
[4] Calculated values for reference only.
[5] Unit supplied set to rms; see manual for peak selection.
[6] Typical.
[7] Alkaline type recommended for longest service life.
[8] Maximum.
[9] This specification for external DC power supply (optional).
[10] Test sensor should be hand tightened (without tools).
[11] Transducer to shaker table.
[12] See PCB Declaration of Conformance PS022 for details.

Accessories:

標準付属アクセサリ

073A15	ﾊﾞｯﾃﾘｰﾊﾟｯｸ
080A109	ﾍﾟﾄﾛﾜｯｸｽ(試供品 1個入)
080A84	ﾏｳﾝﾄﾍﾞｰｽ(5-40/10-32)
080A85	ﾏｳﾝﾄﾍﾞｰｽ(M3/10-32)
081A08	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/1/4)
081B05	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/10-32)
M081B05	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/M6x0.75)
M081B23	ﾏｳﾝﾄｽﾀｯﾄﾞ(10-32/M5)

選択アクセサリ

080A24	ﾍﾟﾄﾛﾜｯｸｽ(4個入)
ACS-QC	校正機器リスト

Optional Versions:

( M ) Metric Mount

Acceleration Output (±3 %)

10.0 m/s² rms

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet