M608A11 | PCBセンサ・オンラインストア東陽テクニカ

Model: M608A11
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, M6 mounting stud, single point ISO 17025 accredited calibration

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±15 %)	10.2 mV/(m/s²)	[1]
Measurement Range	±490 m/s²
Frequency Range (±3 dB)	0.5 to 10000 Hz
Resonant Frequency	22 kHz	[3]
Broadband Resolution (1)	3434 µm/sec²	[3]
Non-Linearity	±1 %	[2]
Transverse Sensitivity	≤7 %
Environmental
Overload Limit (Shock)	49050 m/s² pk
Temperature Range	-54 to +121 °C
Temperature Response	See Graph %/°F	[3]
Enclosure Rating	IP68
Electrical
Settling Time (within 1% of bias)	≤2.0 sec
Discharge Time Constant	≥0.3 sec
Excitation Voltage	18 to 28 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	<150 Ohm
Output Bias Voltage	8 to 12 VDC
Spectral Noise (10 Hz)	78.5 (µm/sec²)/√Hz	[3]
Spectral Noise (100 Hz)	49.1 (µm/sec²)/√Hz	[3]
Spectral Noise (1 kHz)	39.2 (µm/sec²)/√Hz	[3]
Electrical Isolation (Case)	>100000000 Ohm
Physical
Size - Hex	14 mm
Size - Height	64 mm
Weight (with cable)	99.3 gm
Mounting	Stud
Mounting Thread	1/4-28 Female	[5]
Mounting Torque	2.7 to 6.8 Nm
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Stainless Steel
Sealing	Molded
Electrical Connector	Molded Integral Cable
Electrical Connection Position	Top
Cable Length	3 m
Cable Type	Polyurethane	[4]

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] Twisted shielded pair.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:

No Accessories

Optional Versions:

( EX ) Hazardous Area Approval- contact factory for specific approvals

Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	EEx nL IIC 1T4, -40 = Ta = 121°C, II 3 G

( LB ) Low Bias Voltage

Excitation Voltage	12 to 28
Measurement Range	±98
Output Bias Voltage	4.8 to 6.5

( M ) Metric Mount

Accessories:

M081A61

Mounting Stud

( TO ) Temperature Output

Electrical Connections (Red)	Acceleration Output
Electrical Connections (White)	Temperature Output
Electrical Connections (Black)	Ground
Electrical Connector	Molded Integral Cable
Temperature Output Range	+2 to +121 °C
Temperature Scale Factor	+10 mV/°C

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet