M602D01 | PCBセンサ・オンラインストア東陽テクニカ

Model: M602D01
Platinum Stock Products; Low profile, industrial, ceramic shear ICP® accel., 100 mV/g, 0.5 to 8000 Hz, side exit, 2-pin connector, single point ISO 17025 accredited calibration

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±10 %)	10.2 mV/(m/s²)	[1]
Measurement Range	±490 m/s²
Frequency Range (±3 dB)	0.5 to 8000 Hz	[3]
Resonant Frequency	25 kHz	[4]
Broadband Resolution	3434 µm/sec²	[4]
Non-Linearity	±1 %	[2]
Transverse Sensitivity	≤7 %
Environmental
Overload Limit (Shock)	49050 m/s² pk
Temperature Range	-54 to +121 °C
Temperature Response	See Graph %/°F	[4]
Enclosure Rating	IP68
Electrical
Settling Time (within 1% of bias)	≤2.0 sec
Discharge Time Constant	≥0.3 sec
Excitation Voltage	18 to 28 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	<150 Ohm
Output Bias Voltage	8 to 12 VDC
Spectral Noise (10 Hz)	78.5 (µm/sec²)/√Hz	[4]
Spectral Noise (100 Hz)	49.1 (µm/sec²)/√Hz	[4]
Spectral Noise (1 kHz)	39.2 (µm/sec²)/√Hz	[4]
Electrical Isolation (Case)	>100000000 Ohm
Physical
Size - Length	41.9 mm
Size - Width	18.8 mm
Size - Height	21.5 mm
Weight	74.0 gm
Mounting Thread	No Metric Equivalent	[5]
Mounting Torque	2.7 to 6.8 Nm
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Stainless Steel
Sealing	Welded Hermetic
Electrical Connector	2-Pin MIL-C-5015
Electrical Connection Position	Side

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.

Accessories:

標準付属アクセサリ

081A97

選択アクセサリ

M081A97

Optional Versions:

( EX ) Hazardous Area Approval- contact factory for specific approvals

Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	EEx ia IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	EEx ia IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 3 G
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 3 G
Hazardous Area Approval	Ex nL IIC T4, -40°Câ‰¤Taâ‰¤121°C, II 3 G
Hazardous Area Approval	Ex nL IIC T4, -40°Câ‰¤Taâ‰¤121°C, II 3 G
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G
Hazardous Area Approval	EEx nL IIC T4, -40 ° C ≤ Ta ≤ 121 ° C, II 1 G

( M ) Metric Mount

Accessories:

M081B97

Captive Mounting Bolt

( TO ) Temperature Output

Electrical Connections (Pin B)	Ground
Electrical Connections (Pin C)	Temperature Output
Electrical Connections (Pin A)	Acceleration Output
Electrical Connector	3-Pin
Temperature Output Range	+2 to +121 °C
Temperature Scale Factor	+10 mV/°C

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet