PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
東陽テクニカ
キャンペーン
カテゴリから検索
Model: EXM603C01
Platinum Low-cost Industrial ICP® Accelerometer
Intrinsically safe, industrial, ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 2-pin conn., single point ISO 17025 accredited calibration
Price: 見積品

ケーブル別売
■ Specifications
Performance
Sensitivity (±10 %) 10.2 mV/(m/s²) [1]
Measurement Range ±490 m/s²
Frequency Range (±3 dB) 0.5 to 10000 Hz [3]
Resonant Frequency 25 kHz [4]
Broadband Resolution (1) 3434 µm/sec2 [4]
Non-Linearity ±1 % [2]
Transverse Sensitivity ≤7 %
Environmental
Overload Limit (Shock) 49050 m/s² pk
Temperature Range -54 to +121 °C
Temperature Response See Graph %/°F [4]
Enclosure Rating IP68
Electrical
Settling Time (within 1% of bias) ≤2.0 sec
Discharge Time Constant ≥0.3 sec
Excitation Voltage 18 to 28 VDC
Constant Current Excitation 2 to 20 mA
Output Impedance <150 Ohm
Output Bias Voltage 8 to 12 VDC
Broadband Electrical Noise (1 to 10000 Hz) 5 µV [4]
Spectral Noise (10 Hz) 78.5 (µm/sec2)/√Hz [4]
Spectral Noise (100 Hz) 49.1 (µm/sec2)/√Hz [4]
Spectral Noise (1 kHz) 39.2 (µm/sec2)/√Hz [4]
Electrical Isolation (Case) >100000000 Ohm
Physical
Size - Hex 18 mm
Size - Height 42.2 mm
Weight 51 gm
Mounting Thread No Metric Equivalent [5]
Mounting Torque 2.7 to 6.8 Nm
Sensing Element Ceramic
Sensing Geometry Shear
Housing Material Stainless Steel
Sealing Welded Hermetic
Electrical Connector 2-Pin MIL-C-5015
Electrical Connection Position Top
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] The high frequency tolerance is accurate within ±10% of the specified frequency.
[4] Typical.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
標準付属アクセサリ
081A40 マウントスタッド
ICS-2 校正データ
Optional Versions:
( EX ) Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G

( M ) Metric Mount
Accessories:
M081A61 Mounting Stud

( TO ) Temperature Output
Electrical Connections (Pin C) Temperature Output
Electrical Connections (Pin A) Acceleration Output
Electrical Connections (Pin B) Ground
Electrical Connector 3-Pin MIL-C-5015
Size - Height 47.2
Temperature Output Range +2 to +121 °C
Temperature Scale Factor +10 mV/°C
Weight 56.7


■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。