PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
Model: 685B1001A41
Electronic Vibration Switch
Electronic vibration switch, external ICP®, 0-1.5 in/sec peak, AC powered, 10A form C relays, external BNC, external pushbutton reset, dual 1/2 NPT conduit hubs
Price: 見積品

■ Specifications
Measurement Range 0 to 38.1 mm/s pk
Frequency Range (±3 dB) 2 to 1000 Hz
Power On Delay 20 sec
Relay (Alert) 10 A, 245 VAC/30 VDC, Form C
Relay (Alarm) 10 A, 245 VAC/30 VDC, Form C
Relay(Contacts) Latching / Non-Latching
Relay(Contacts) Normally Open / Closed
Alarm Setpoint 10 to 100% of Vibration Range
Alert Setpoint 10 to 100% of Alarm Setpoint
Delay (Alert) 0 to 45 sec
Delay (Alarm) 0 to 45 sec
Acceleration Output (±10 %) 10.2 mV/(m/s²)
Control Interface
Power LED Green
Alarm LED Red
Alert LED Yellow
Time Delay Adjustment Single Turn Potentiometer
Reset Function Momentary Pushbutton Switch
Self Test Function Momentary Pushbutton Switch
Temperature Range (Operating) -30 to 70 °C
Temperature Range (Storage) -40 to 125 °C
Enclosure Rating IP66
Power Required 85-245 VAC 50/60 Hz
Current Consumption <150 mA
Output Current 4 to 20 mA
External Calibration Input 4 to 20 mA
Size - Width 90 mm
Size - Height 70 mm
Size - Depth 90 mm
Weight 839 gm
Mounting Torque (Cover Screw) 5.7 Nm
Mounting Torque (Base) 3 to 7 Nm
Sensing Element (External) 100 mV/g ICP" Accelerometer
Housing Material Aluminum Alloy
Electrical Connector Screw Terminals
Enclosure Internal and Remote Reset
Enclosure Buffered Acceleration Signal through External BNC (100 mV/g)
Enclosure External Pushbutton Reset
Screw Terminal Wire Size 0.2 - 2.5 mm²
Cable Input Dual 1/2 in. NPT Conduit Hubs
Mounting Hole Size 5.4 mm
All specifications are at room temperature unless otherwise specified.
Product Notes
No product notes
No Accessories
Optional Versions:
No optional versions
■ Documents & Downloads
Product Documents