PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
東陽テクニカ
キャンペーン
カテゴリから検索
Model: 608A11
Platinum Low-cost Industrial ICP® Accelerometer
Platinum Stock Products; Low-cost, general purpose, industrial ceramic shear ICP® accel, 100 mV/g, 0.5 to 10k Hz, top exit, 10-ft integral cable, single point ISO 17025 accredited calibration
Price: 見積品

ケーブル一体型
■ Specifications
Performance
Sensitivity (±15 %) 10.2 mV/(m/s²) [1]
Measurement Range ±490 m/s²
Frequency Range (±3 dB) 0.5 to 10000 Hz
Resonant Frequency 22 kHz [3]
Broadband Resolution (1) 3434 µm/sec2 [3]
Non-Linearity ±1 % [2]
Transverse Sensitivity ≤7 %
Environmental
Overload Limit (Shock) 49050 m/s² pk
Temperature Range -54 to +121 °C
Temperature Response See Graph %/°F [3]
Enclosure Rating IP68
Electrical
Settling Time (within 1% of bias) ≤2.0 sec
Discharge Time Constant ≥0.3 sec
Excitation Voltage 18 to 28 VDC
Constant Current Excitation 2 to 20 mA
Output Impedance <150 Ohm
Output Bias Voltage 8 to 12 VDC
Spectral Noise (10 Hz) 78.5 (µm/sec2)/√Hz [3]
Spectral Noise (100 Hz) 49.1 (µm/sec2)/√Hz [3]
Spectral Noise (1 kHz) 39.2 (µm/sec2)/√Hz [3]
Electrical Isolation (Case) >100000000 Ohm
Physical
Size - Hex 14 mm
Size - Height 64 mm
Weight (with cable) 99.3 gm
Mounting Stud
Mounting Thread 1/4-28 Female [5]
Mounting Torque 2.7 to 6.8 Nm
Sensing Element Ceramic
Sensing Geometry Shear
Housing Material Stainless Steel
Sealing Molded
Electrical Connector Molded Integral Cable
Electrical Connection Position Top
Cable Length 3 m
Cable Type Polyurethane [4]
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Conversion Factor 1g = 9.81 m/s².
[2] Zero-based, least-squares, straight line method.
[3] Typical.
[4] Twisted shielded pair.
[5] 1/4-28 has no equivalent in S.I. units.
[6] See PCB Declaration of Conformance PS023 or PS060 for details.
Accessories:
標準付属アクセサリ
081A40 マウントスタッド
ICS-2 校正データ
Optional Versions:
( EX ) Hazardous Area Approval- contact factory for specific approvals
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 3 G
Hazardous Area Approval EEx nL IIC T4, -40°C<=Ta<=121°C, II 1 G
Hazardous Area Approval Cl I, Div I, Groups A, B, C, D; Cl II, Div I, Groups E, F, G; Cl III, Div I
Hazardous Area Approval Cl I, Div 2, Groups A, B, C, D; ExnL IIC T4, AExnA IIC T4
Hazardous Area Approval Ex ia IIC T4, AExia IIC, T4

( LB ) Low Bias Voltage
Excitation Voltage 12 to 28
Measurement Range ±98
Output Bias Voltage 4.8 to 6.5

( M ) Metric Mount
Accessories:
M081A61 Mounting Stud

( TO ) Temperature Output
Electrical Connections (White) Temperature Output
Electrical Connections (Red) Acceleration Output
Electrical Connections (Black) Ground
Electrical Connector Molded Integral Cable
Temperature Output Range +2 to +121 °C
Temperature Scale Factor +10 mV/°C


■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。