485B36 %E3%82%B7%E3%82%B0%E3%83%8A%E3%83%AB%E3%82%B3%E3%83%B3%E3%83%87%E3%82%A3%E3%82%B7%E3%83%A7%E3%83%8A ICP%E3%82%BB%E3%83%B3%E3%82%B5%E5%AF%BE%E5%BF%9C| PCBセンサ・オンラインストア東陽テクニカ

Model: 485B36
2-channel, USB-powered, ICP® signal conditioner, unity gain

■ Specifications

Performance
Channels	2
Input Range	±5 V
Frequency Range (±2 %)	2 to 50000 Hz	[1]
Frequency Range (±5 %)	1 to 50000 Hz	[1]
Non-Linearity	±1 %
Voltage Gain (±0.5 %)	1:1
Phase Response (±5 °)	5 to 50000 Hz	[1]
Phase Response (±10 °)	1 to 50000 Hz	[1]
Environmental
Temperature Range (Operating)	0 to +50 °C
Electrical
Excitation Voltage (To Sensor)	18.5 to 20.5 VDC
Constant Current Excitation (To Sensor)	3.8 to 5.8 mA
DC Offset	<80 mV
Spectral Noise (1 Hz)	150 nV/√Hz	[2]
Spectral Noise (10 Hz)	50 nV/√Hz	[2]
Spectral Noise (100 Hz)	35 nV/√Hz	[2]
Spectral Noise (1000 Hz)	270 nV/√Hz	[2]
Spectral Noise (10000 Hz)	210 nV/√Hz	[2]
Broadband Electrical Noise (1 to 10000 Hz)	6 µV/rms	[2]
Power Required	DC Power
Total Harmonic Distortion (at 100 Hz with full-scale input)	0.75 %	[2]
DC Power	5 VDC
Crosstalk	<-92 dB
Current Consumption	69 mA	[2]
Output Impedance (Parallel)	1.1 MOhm	[2]
Output Impedance (Series)	2.2 µF	[2]
Physical
Electrical Connector (Input, sensor)	BNC Jack
Electrical Connector (Output, scope)	3.5 mm Stereo Jack
Electrical Connector (External Power, DC)	Integral Cable with USB Plug Termination
Size - Depth	3.4 cm
Size - Height	3.0 cm
Size - Width	9.3 cm
Weight	70 gm	[2]

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Un-buffered output, read out device input impedance affects discharge time constant and low frequency response of unit.
[2] Typical.

Accessories:

標準付属アクセサリ

009M130	出力ケーブル
009M131	出力ケーブル

選択アクセサリ

ERC-QC	校正証明書

Optional Versions:

No optional versions

■ Documents & Downloads

Product Documents