PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
東陽テクニカ
キャンペーン
カテゴリから検索
Model: 483C40
Eight-Channel ICP®/Voltage/Charge Sensor Signal Conditioner
8-channel, line-powered, ICP®/charge sensor signal cond., gain, selectable LPF, Ethernet
Price: 見積品

ケーブル別売
■ Specifications
Performance
Channels 8
Sensor Input Type(s) ICP®, Voltage, Charge
Gain (ICP®/ Voltage Input) 0.1 to 200
Gain (mV/pC ) (Charge Input) 0.01 to 2000
Gain Increment(minimum) (ICP®/ Voltage Input) 0.1
Gain Increment(minimum) (Charge Input) 0.01
Accuracy(ICP®/ Voltage Input) (Gain, 0.1 to 0.4) ±5 %
Accuracy(ICP®/ Voltage Input) (Gain, 0.5 to 200) ±1 %
Accuracy(Charge Input) (Gain, 0.01 to 0.04) ±6 %
Accuracy(Charge Input) (Gain, 0.05 to 2000) ±1 %
Input Range(maximum) (Charge Input) 100000 pC pk
Input Range(maximum) (ICP® Input) 10 Vpk [3]
Input Range(maximum) (Voltage Input) 5 Vpk
Low Frequency Response (-5 %) (ICP®/ Voltage Input) ≤0.05 Hz
Low Frequency Response (-5 %) (Charge Input) 0.5 Hz [2]
Filter Type (8-pole Butterworth) Low Pass
Electrical Filter Roll-off 160 dB/decade
High Frequency Response (-3 dB) (Gain from 0.01 to 99.9) >100 kHz
High Frequency Response (-3 dB) (Gain from 100 to 2000) >80 kHz
Electrical Filter Corner Frequency (-10 %) 0.1-0.3-1-3-10-30 kHz [1]
Electrical Filter Pass Band Amplitude Accuracy 1 %
Phase Response (at 1 kHz) ±2 °
Non-Linearity 1 %
Cross Talk <-72 dB
TEDS Sensor Support Yes
Fault/Bias Monitor LEDS Open/Short/Overload
Control Interface
Digital Control Interface Ethernet
Environmental
Temperature Range (Operating) 0 to +50 °C
Electrical
Power Required (direct input to unit) AC Power [6]
AC Power (47 to 63 Hz) 100 to 240 VAC
AC Power ≤0.7 Amps [6]
Excitation Voltage (To Sensor) >24 VDC
DC Offset <50 mV
Constant Current Excitation (To Sensor) 2 to 20 mA [5]
Output Voltage (minimum) 10 V
Output Current (minimum) 10 mA
Output Impedance <50 Ohm
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 50 µV/rms [4]
Spectral Noise (1 Hz) 8 µV/√Hz [4]
Spectral Noise (10 Hz) 2 µV/√Hz [4]
Spectral Noise (100 Hz) 0.7 µV/√Hz [4]
Spectral Noise (1 kHz) 0.7 µV/√Hz [4]
Spectral Noise (10 kHz) 0.6 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 kHz) (Gain x10) 75 µV rms [4]
Spectral Noise (1 Hz) 18 µV/√Hz [4]
Spectral Noise (10 Hz) 1.5 µV/√Hz [4]
Spectral Noise (100 Hz) 1.0 µV/√Hz [4]
Spectral Noise (1 kHz) 1.0 µV/√Hz [4]
Spectral Noise (10 kHz) 1.0 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 350 µV rms [4]
Spectral Noise (1 Hz) 100 µV/√Hz [4]
Spectral Noise (10 Hz) 10 µV/√Hz [4]
Spectral Noise (100 Hz) 6 µV/√Hz [4]
Spectral Noise (1 kHz) 5 µV/√Hz [4]
Spectral Noise (10 kHz) 5 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (0.1 mV/pC) 52.0 µV/rms [4]
Spectral Noise (1 Hz) 10.0 µV/√Hz [4]
Spectral Noise (10 Hz) 1.5 µV/√Hz [4]
Spectral Noise (100 Hz) 0.6 µV/√Hz [4]
Spectral Noise (1 kHz) 0.6 µV/√Hz [4]
Spectral Noise (10 kHz) 0.6 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (1.0 mV/pC) 52.0 µV/rms [4]
Spectral Noise (1 Hz) 14.0 µV/√Hz [4]
Spectral Noise (10 Hz) 2.0 µV/√Hz [4]
Spectral Noise (100 Hz) 0.7 µV/√Hz [4]
Spectral Noise (1 kHz) 0.7 µV/√Hz [4]
Spectral Noise (10 kHz) 0.7 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (10.0 mV/pC) 56.0 µV/rms [4]
Spectral Noise (1 Hz) 15.0 µV/√Hz [4]
Spectral Noise (10 Hz) 2.0 µV/√Hz [4]
Spectral Noise (100 Hz) 0.6 µV/√Hz [4]
Spectral Noise (1 kHz) 0.6 µV/√Hz [4]
Spectral Noise (10 kHz) 0.6 µV/√Hz [4]
Oscillator (+/- 2% ) (Internal Generator - ICP®/ Voltage Mode) 0.1 V pk
Oscillator (+/- 2% ) (Internal Generator - Charge Mode) 100 pC pk
Oscillator (+/- 2% ) 100/1000 Hz
Overload Threshold (±0.5 Vpk) 10 Vpk
Physical
Electrical Connector (Input, sensor) BNC Jack
Electrical Connector (Output) BNC Jack
Electrical Connector (Ethernet) RJ-45
Size - Height (nominal ) 44.5 mm
Size - Width (nominal ) 482.6 mm
Size - Depth (nominal ) 348 mm
Weight 3.6 kg
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] The high frequency tolerance is accurate within ±5% of the specified frequency.
[2] The low frequency tolerance is accurate within ±25% of the specified frequency.
[3] Max input signal is dependant on sensor bias.
[4] Typical.
[5] User adjustable, factory set at 4 mA (± 1.0 mA). Each channel individually adjustable.
[6] Use T1.6A fuse.
[7] See PCB Declaration of Conformance PS024 for details.
Accessories:
標準付属アクセサリ
EE75 コントロールソフトウェア
選択アクセサリ
ERC-QC 校正証明書
Optional Versions:
No optional versions

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。