PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
東陽テクニカ
キャンペーン
カテゴリから検索
Model: 483C28
Sensor Signal Conditioner
8-channel, line-powered, bridge/differential/ICP® sensor signal cond., incremental gain, Autozero, Ethernet
Price: 見積品

ケーブル別売
■ Specifications
Performance
Channels 8
Sensor Input Type(s) ICP®, Voltage, Bridge/Differential
Voltage Gain (ICP/Voltage Mode) x0.1 to x200
Voltage Gain (Bridge/Differential Mode) x0.1 to x2000
Accuracy (Gain, x0.1 to x0.4) ±5 %
Accuracy (Gain, x0.5 to x0.99) ±1 %
Accuracy (Gain, x1.0 to x2000) ±0.5 %
Accuracy (Excitation) ±1 %
Input Range (Differential) ±0 to 10 V
Output Range (Minimum) ±10 V
Frequency Range (-5 %) (≥100 Gain) 0.05 to 50000 Hz [1]
Frequency Range (-5 %) (x100 Gain) 0.05 to 100000 Hz [1]
Phase Response (at 1 kHz) ±1 °
Cross Talk (maximum @ 10kHz) -72 dB
Calibration (Shunt) Internal/External
TEDS Sensor Support Yes
Fault/Bias Monitor/Meter (LED) Open/Short/Overload
Control Interface
Digital Control Interface Ethernet
Environmental
Temperature Range (Operating) 0 to +50 °C
Electrical
Power Required (direct input to unit) AC Power
AC Power (47 to 63 Hz) 100 to 240 VAC
AC Power ≤0.9 Amps
Excitation Voltage (To Sensor) >+24 VDC
Excitation Voltage (Bridge Input ) (Negative) -0 to 12 V [2] [3]
Excitation Voltage (Bridge Input ) (Positive) +0 to 12 V [2]
Input Imbalance Adjustment (Maximum, Gain <10) ±2 V
Input Imbalance Adjustment (Maximum, Gain ≥10) ±0.2 V
Common Mode Voltage (Maximum) ±10 V
DC Offset (Stability, Maximum RTI) 5 µV/°C
DC Offset (AC Coupled) ≤50 mV
DC Offset (DC Coupled, Gain <100) <10 mV
DC Offset (DC Coupled, Gain ≥100) <20 mV
Current Output (Bridge Input ) (Excitation, Maximum) 30 mA
Constant Current Excitation (To Sensor) 0 to 20 mA
Output Impedance ≤50 Ohm
Impedance (Input) >1 MOhm
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 50 µV rms [5]
Spectral Noise (1 Hz ) (Gain x1) 6.0 µV/√Hz [5]
Spectral Noise (10 Hz ) (Gain x1) 1.5 µV/√Hz [5]
Spectral Noise (100 Hz ) (Gain x1) 1.0 µV/√Hz [5]
Spectral Noise (1 kHz ) (Gain x1) 1.0 µV/√Hz [5]
Spectral Noise (10 kHz ) (Gain x1) 1.0 µV/√Hz [5]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 75 µV rms [5]
Spectral Noise (1 Hz ) (Gain x10) 20 µV/√Hz [5]
Spectral Noise (10 Hz ) (Gain x10) 1.5 µV/√Hz [5]
Spectral Noise (100 Hz ) (Gain x10) 1.0 µV/√Hz [5]
Spectral Noise (1 kHz ) (Gain x10) 1.0 µV/√Hz [5]
Spectral Noise (10 kHz ) (Gain x10) 1.0 µV/√Hz [5]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 350 µV rms [5]
Spectral Noise (1 Hz ) (Gain x100) 140.0 µV/√Hz [5]
Spectral Noise (10 Hz ) (Gain x100) 14.0 µV/√Hz [5]
Spectral Noise (100 Hz ) (Gain x100) 8.0 µV/√Hz [5]
Spectral Noise (1 kHz ) (Gain x100) 4.0 µV/√Hz [5]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1000) 3000 µV/rms [4]
Spectral Noise (10 kHz ) (Gain x100) 4.0 µV/√Hz [5]
Overload Threshold (±0.2 Vpk) 10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack
Electrical Connector (Bridge/Differential) 8-socket mini DIN
Electrical Connector (Output) BNC Jack
Electrical Connector (Ethernet) RJ-45
Size - Height (nominal ) 44.5 mm
Size - Width (nominal ) 482.6 mm
Size - Depth (nominal ) 348 mm
Weight 3.18 kg
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] AC coupled mode (low frequency response is 0Hz in DC Coupled mode.)
[2] Adjustable in 0.1V steps.
[3] Negative excitation can be set to 0V or to track the positive excitation votage.
[4] Bridge/Differential Mode, DC Coupled with 350 ohm bridge
[5] Typical, AC Coupled.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
標準付属アクセサリ
EE75 コントロールソフトウェア
選択アクセサリ
ERC-QC 校正証明書
Optional Versions:
No optional versions

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。