＜お知らせ＞
消費税率改正にともなう対応に関して
PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
購入/見積カートを見る
お問い合わせ
キャンペーン
カテゴリから検索
東陽テクニカ
キャンペーン
カテゴリから検索
●加速度計
●ロードセル
●圧力センサ
●マイク
●シグナルコンディショナ
●工業用センサ


Click to zoom
Model: 482C54
4-channel ICP® Sensor Signal Conditioner
4-channel, line-powered, ICP®/charge sensor signal cond., incremental gain, selectable charge conversion, TEDS, 10k LPF, RS-232
Price: 見積品

ケーブル別売
■ Specifications
Performance
Channels 4
Sensor Input Type(s) ICP®, Voltage, Charge
Voltage Gain x0 to x200
Voltage Gain Increment 0.1
Accuracy (Gain, x0.1 to x0.4) ±5 %
Accuracy (Gain, x0.5 to x200) ±1 %
Sensitivity (±1 %) (Charge Input @ 100 Hz) 0.1 / 1.0 / 10.0 mV/pC
Insulation Resistance at Input(Minimum Required) (0.1) 10 kohm
Insulation Resistance at Input (1.0) 100 kohm
Insulation Resistance at Input (10.0) 1 MOhm
Input Range (Charge Input, Nominal) ±100000 pC
Output Range (Minimum) ±10 Vpk
Frequency Range (-5 %) (x100 to x200 Gain) 0.05 to 75000 Hz
Frequency Range (-5 %) (x0.1 to x99.9 Gain) 0.05 to 100000 Hz
Low Frequency Response (-5 %) (Charge Input) 0.5 Hz [1]
Filter Type (Fourth-order Butterworth) Low Pass
Electrical Filter Roll-off 80 dB/decade
Electrical Filter Corner Frequency (-3 dB) 10 kHz [2] [3]
Electrical Filter Roll-off 24 dB/octave
Electrical Filter Pass Band Amplitude Accuracy 1 %
Electrical Filter Stop Band Attenuation (Minimum) 96 dB
Phase Response (at 1 kHz) ±1 °
Non-Linearity (Charge Input) ≤1 % FS
Cross Talk (maximum) -72 dB
TEDS Sensor Support Yes
Fault/Bias Monitor/Meter (LED) Open/Short/Overload
Control Interface
Digital Control Interface RS-232
Human Interface Keypad
Display 2 rows, 16 columns
Digital Control: Data Rate 19200 bps
Digital Control: Start, Data, Stop, Parity 1, 8, 1, No
Digital Control: Handshaking RTS/CTS
Digital Control: Cable Length (Maximum) 15.2 m
Environmental
Temperature Range (Operating) 0 to +50 °C
Electrical
Power Required (for supplied AC power adaptor) AC Power
Power Required (direct input to unit) DC Power
AC Power (50 to 60 Hz) 100 to 240 VAC
AC Power ≤1.6 Amps
DC Power +9 to +18 VDC
DC Power ≤2.5 Amps
Excitation Voltage (To Sensor) ≥+24 VDC
DC Offset ≤50 mV
Constant Current Excitation (To Sensor) 0 to 20 mA [5]
Output Impedance ≤50 Ohm
Broadband Electrical Noise (1 to 10000 Hz) (Gain x1) 50 µV rms [4]
Spectral Noise (1 Hz ) (Gain x1) 8.0 µV/√Hz [4]
Spectral Noise (10 Hz ) (Gain x1) 1.5 µV/√Hz [4]
Spectral Noise (100 Hz ) (Gain x1) 1.0 µV/√Hz [4]
Spectral Noise (1 kHz ) (Gain x1) 1.0 µV/√Hz [4]
Spectral Noise (10 kHz ) (Gain x1) 1.0 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x10) 75 µV rms [4]
Spectral Noise (1 Hz ) (Gain x10) 20 µV/√Hz [4]
Spectral Noise (10 Hz ) (Gain x10) 1.5 µV/√Hz [4]
Spectral Noise (100 Hz ) (Gain x10) 1.0 µV/√Hz [4]
Spectral Noise (1 kHz ) (Gain x10) 1.0 µV/√Hz [4]
Spectral Noise (10 kHz ) (Gain x10) 1.0 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (Gain x100) 350 µV rms [4]
Spectral Noise (1 Hz ) (Gain x100) 100.0 µV/√Hz [4]
Spectral Noise (10 Hz ) (Gain x100) 10.0 µV/√Hz [4]
Spectral Noise (100 Hz ) (Gain x100) 8.0 µV/√Hz [4]
Spectral Noise (1 kHz ) (Gain x100) 6.0 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (0.1 mV/pC & Gain x1) 52.0 µV/rms [4]
Spectral Noise (10 kHz ) (Gain x100) 6.0 µV/√Hz [4]
Spectral Noise (1 Hz) (0.1 mV/pC & Gain x1) 10.0 µV/√Hz [4]
Spectral Noise (10 Hz) (0.1 mV/pC & Gain x1) 1.5 µV/√Hz [4]
Spectral Noise (100 Hz) (0.1 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Spectral Noise (1000 Hz) (0.1 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Spectral Noise (10000 Hz) (0.1 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (1.0 mV/pC & Gain x1) 52.0 µV rms [4]
Spectral Noise (1 Hz) (1.0 mV/pC & Gain x1) 14.0 µV/√Hz [4]
Spectral Noise (10 Hz) (1.0 mV/pC & Gain x1) 2.0 µV/√Hz [4]
Spectral Noise (100 Hz) (1.0 mV/pC & Gain x1) 0.7 µV/√Hz [4]
Spectral Noise (1000 Hz) (1.0 mV/pC & Gain x1) 0.7 µV/√Hz [4]
Spectral Noise (10000 Hz) (1.0 mV/pC & Gain x1) 0.7 µV/√Hz [4]
Broadband Electrical Noise (1 to 10000 Hz) (10.0 mV/pC & Gain x1) 56.0 µV rms [4]
Spectral Noise (1 Hz) (10.0 mV/pC & Gain x1) 15.0 µV/√Hz [4]
Spectral Noise (10 Hz) (10.0 mV/pC & Gain x1) 2.0 µV/√Hz [4]
Spectral Noise (100 Hz) (10.0 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Spectral Noise (1000 Hz) (10.0 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Spectral Noise (10000 Hz) (10.0 mV/pC & Gain x1) 0.6 µV/√Hz [4]
Calibration Input (±1 %) ±1000 pC/V
Overload Threshold (±0.2 Vpk) +10 Vpk
Physical
Electrical Connector (ICP® Sensor Input) BNC Jack
Electrical Connector (Charge Sensor Input) BNC Jack
Electrical Connector (Output) BNC Jack
Electrical Connector (DC Power Input) 6-socket mini DIN (female)
Electrical Connector (Charge Calibration Input) BNC Jack
Electrical Connector (RS-232 Digital Control) DB-9 Connector
Size - Height 8.1 cm
Size - Width 20 cm
Size - Depth 15 cm
Weight 1089 gm
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] The low frequency tolerance is accurate within ±20% of the specified frequency.
[2] Frequency tolerance is within ± 5% of the specified value.
[3] Contact factory for other available frequencies.
[4] Typical.
[5] User adjustable, factory set at 4 mA (± 1.0 mA). One control adjusts all channels.
[6] See PCB Declaration of Conformance PS024 for details.
Accessories:
標準付属アクセサリ
100-7103-50
488A14/NC
EE75 コントロールソフトウェア
選択アクセサリ
ERC-QC 校正証明書
Optional Versions:
No optional versions

■ Documents & Downloads
Product Documents
● Product Manual
● Product Specification Sheet
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。
お問い合わせ
PCB社製品の見積・購入/PCBオンラインストア
東陽テクニカ
Copyright©2018 TOYO Corporation. All rights reserved.

株式会社 東陽テクニカ　機械計測センサ部 〒103-8284 東京都中央区八重洲1-1-6　TEL:03-3245-1240　FAX:03-3246-0645　プライバシーポリシー　特定商取引法に基づく表記　ご利用ガイド