PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。
東陽テクニカ
キャンペーン
カテゴリから検索
Model: 443B102
Modular Series Power Supply
1-channel module only, dual-mode charge amplifier
Price: 見積品

ケーブル別売
■ Specifications
Performance
Sensor Input Type(s) ICP®, Charge
Sensor Input Type(s) ICP®, Charge
Voltage Gain Increment 0.1-1000
Voltage Gain Increment 0.1-1000
Accuracy(ICP®/ Voltage Input) ±0.5 %
Accuracy(ICP®/ Voltage Input) ±0.5 %
Accuracy(Charge Input) ±0.5 %
Accuracy(Charge Input) ±0.5 %
Sensitivity (ICP®/Voltage) .001 to 9.999 mV/unit [2]
Sensitivity (ICP®/Voltage) .001 to 9.999 mV/unit [2]
Sensitivity (Charge Input) 0.0001 to 10 V/pC
Sensitivity (Charge Input) 0.0001 to 10 V/pC
Input Range(maximum) (Charge Input) 100000 pC [1]
Input Range(maximum) (Charge Input) 100000 pC [1]
Low Frequency Response (-10 %) 2.0 Hz ±20 %
Low Frequency Response (-10 %) 2.0 Hz ±20 %
Low Frequency Response (-10 %) 0.2 Hz ±20 %
Low Frequency Response (-10 %) 0.2 Hz ±20 %
Low Frequency Response (10 %) (Velocity) 1.0 Hz ±5 %
Low Frequency Response (10 %) (Velocity) 1.0 Hz ±5 %
Low Frequency Response (10 %) (Velocity) 10 Hz ±5 %
Low Frequency Response (10 %) (Velocity) 10 Hz ±5 %
Low Frequency Response (10 %) (Displacement) 1.0 Hz ±5 %
Low Frequency Response (10 %) (Displacement) 1.0 Hz ±5 %
Low Frequency Response (10 %) (Displacement) 10 Hz ±5 %
Low Frequency Response (10 %) (Displacement) 10 Hz ±5 %
High Frequency Response (-10 %) 200 kHz ±5 %
High Frequency Response (-10 %) 200 kHz ±5 %
Filter Type (4-pole Butterworth) Low Pass
Filter Type (4-pole Butterworth) Low Pass
Electrical Filter Roll-off 80 dB/decade
Electrical Filter Roll-off 80 dB/decade
High Frequency Response (-10 %) 0.1 kHz ±5 %
High Frequency Response (-10 %) 0.1 kHz ±5 %
High Frequency Response (-10 %) 1.0 kHz ±5 %
High Frequency Response (-10 %) 1.0 kHz ±5 %
High Frequency Response (-10 %) 3.0 kHz ±5 %
High Frequency Response (-10 %) 3.0 kHz ±5 %
High Frequency Response (-10 %) 10 kHz ±5 %
High Frequency Response (-10 %) 10 kHz ±5 %
High Frequency Response (-10 %) 30 kHz ±5 %
High Frequency Response (-10 %) 30 kHz ±5 %
High Frequency Response (-10 %) 100 kHz ±5 %
High Frequency Response (-10 %) 100 kHz ±5 %
Fault/Bias Monitor LEDS Fault/Overload
Fault/Bias Monitor LEDS Fault/Overload
Drift <0.03 pC/s [3]
Drift <0.03 pC/s [3]
Control Interface
Digital Control Interface RS-485 [4]
Digital Control Interface RS-485 [4]
Human Interface Keypad
Human Interface Keypad
Display 2 rows, 16 columns
Display 2 rows, 16 columns
Digital Control: Data Rate 9600 bps
Digital Control: Data Rate 9600 bps
Digital Control: Start, Data, Stop, Parity 1, 8, 1, No
Digital Control: Start, Data, Stop, Parity 1, 8, 1, No
Environmental
Temperature Range (Operating) 0 to +50 °C
Temperature Range (Operating) 0 to +50 °C
Electrical
Power Required (VDC) +15 at 230 mA
Power Required (VDC) +15 at 230 mA
Power Required (VDC) -15 at 140 mA
Power Required (VDC) -15 at 140 mA
Power Required (Watts) 6.25 [10]
Power Required (Watts) 6.25 [10]
Power Required (VDC) +28 at 5 mA + Sensor Current
Power Required (VDC) +28 at 5 mA + Sensor Current
Excitation Voltage 24 ±1 VDC
Excitation Voltage 24 ±1 VDC
DC Offset <50 mV
DC Offset <50 mV
Constant Current Excitation (to Sensor, Selectable) 0 to 20 mA [8]
Constant Current Excitation (to Sensor, Selectable) 0 to 20 mA [8]
Output Voltage >±10 V [9]
Output Voltage >±10 V [9]
Output Impedance <1 Ohm
Output Impedance <1 Ohm
Broadband Electrical Noise (1 Hz to 10 kHz) (ICP® INPUT) -101 dB [11] [6]
Broadband Electrical Noise (1 Hz to 10 kHz) (ICP® INPUT) -101 dB [11] [6]
Broadband Electrical Noise (2 to 22.4 kHz) (ICP® INPUT) <-110 dB [11] [6]
Broadband Electrical Noise (2 to 22.4 kHz) (ICP® INPUT) <-110 dB [11] [6]
Spectral Noise (1 Hz) -120 dB [11]
Spectral Noise (1 Hz) -120 dB [11]
Spectral Noise (10 Hz) -133 dB [11]
Spectral Noise (10 Hz) -133 dB [11]
Spectral Noise (100 Hz) -142 dB [11]
Spectral Noise (100 Hz) -142 dB [11]
Spectral Noise (1 kHz) -142 dB [11]
Spectral Noise (1 kHz) -142 dB [11]
Spectral Noise (10 kHz) -143 dB [11]
Spectral Noise (10 kHz) -143 dB [11]
Broadband Electrical Noise (1 Hz to 10 kHz) (Charge Input) -101 dB [5] [7]
Broadband Electrical Noise (1 Hz to 10 kHz) (Charge Input) -101 dB [5] [7]
Broadband Electrical Noise (2 Hz to 22.4 kHz) (Charge Input) <5 fC [5] [7]
Broadband Electrical Noise (2 Hz to 22.4 kHz) (Charge Input) <5 fC [5] [7]
Spectral Noise (1 kHz) -122 dB [5]
Spectral Noise (1 kHz) -122 dB [5]
Spectral Noise (10 kHz) -134 dB [5]
Spectral Noise (10 kHz) -134 dB [5]
Spectral Noise (100 kHz) -142 dB [5]
Spectral Noise (100 kHz) -142 dB [5]
Spectral Noise (1 kHz) -142 dB [5]
Spectral Noise (1 kHz) -142 dB [5]
Spectral Noise (10 kHz) -143 dB [5]
Spectral Noise (10 kHz) -143 dB [5]
Oscillator (pC RMS) 100±1%
Oscillator (pC RMS) 100±1%
Oscillator (V RMS) 1±1%
Oscillator (V RMS) 1±1%
Oscillator (Hz) 159.2±1%
Oscillator (Hz) 159.2±1%
Time Constant (Long TC Mode) Up to 100,000 [12] [13]
Time Constant (Long TC Mode) Up to 100,000 [12] [13]
Time Constant (Med TC Mode) 10, 100, 1,000 ±20%
Time Constant (Med TC Mode) 10, 100, 1,000 ±20%
Overload Threshold 10 V to ± 1 V
Overload Threshold 10 V to ± 1 V
Physical
Electrical Connector (Input, sensor) BNC
Electrical Connector (Input, sensor) BNC
Electrical Connector (Output) BNC
Electrical Connector (Output) BNC
Electrical Connector (Ext Zero) SMB
Electrical Connector (Ext Zero) SMB
Size - Height 128 x 92 mm [14]
Size - Height 128 x 92 mm [14]
Weight 0.66 kg
Weight 0.66 kg
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Can be increased using optional external 472B series charge attenuator.
[10] Maximum number of 443B102 Dual Mode Signal Conditioners that can be powered by (1) 441A101 is (4). Other modules must be calculated not to exceed total power of 30 watts.
[11] Measured at gain of 1 with low noise ICP® simulator. (High pass filter = 0.2Hz)
[12] Depends on gain setting. LCD displays value when gain is entered.
[13] When in ICP® mode, long TC is true DC response.
[14] Double width unit.
[2] 4 Digit - Selectable
[3] Long time constant charge mode only.
[4] Must be used with PCB 440 series mainframe chassis with computer control (RS-232).
[5] Measured at gain of 1 mV/pC with 1 nF source capacitance.
[6] Measured at gain of 1,000 (60 dB), input referred.
[7] Measured at gain of 10V/pC (80 dB) with 1 nF source capacitance, input referred.
[8] Discrete mA settings (0, 2, 4, 8, 12, or 20).
[9] In medium time constant mode, output range is limitied to ±8V for certain gain settings
Accessories:
選択アクセサリ
ERC-QC 校正証明書
Optional Versions:
No optional versions

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。