422E51 | PCBセンサ・オンラインストア東陽テクニカ

Model: 422E51
In-line charge converter, 100 mV/pC, +/-5V output, -5% frequency 5 Hz

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±5.0 %) (Charge Conversion)	100 mV/pC
Input Range	±50 pC
Overrange	±8 V
Low Frequency Response (-5 %)	5 Hz
High Frequency Response (-5 %)	100 kHz	[1]
Non-Linearity	1.0 % FS
Environmental
Temperature Range (Operating)	-54 to +121 °C
Maximum Shock	49050 m/s² pk
Maximum Vibration (5)	981 m/s² pk
Electrical
Excitation Voltage	18 to 28 VDC
Constant Current Excitation	2 to 20 mA
Output Voltage	±5.0 V
Output Impedance	100 Ohm
Output Bias Voltage	9 to 13 VDC
Output Polarity	Inverted
Maximum Input Voltage	40 V
Broadband Electrical Noise (1 to 10000 Hz)	-86 dB	[2]
Spectral Noise (1 Hz)	-94 dB	[2]
Spectral Noise (10 Hz)	-106 dB	[2]
Spectral Noise (100 Hz)	-116 dB	[2]
Spectral Noise (1 kHz)	-124 dB	[2]
Spectral Noise (10 kHz)	-134 dB	[2]
Capacitance (Feedback)	10 pF
Overload Recovery Time	10 µsec
Discharge Time Constant	>0.1 sec
Resistance (Feedback)	120000000000 Ohm	[3]
Source Capacitance Loading	0.0005 %/pF
Physical
Housing Material	Stainless Steel
Sealing	Epoxy
Electrical Connector (Input)	10-32 Coaxial Jack
Electrical Connector (Output)	BNC Jack
Size - Diameter	13 mm
Size - Length	86 mm
Weight	32.7 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] High frequency response may be limited by supply current and output cable length.
[2] Tested using voltage source and input capacitor equal to the feedback capacitor, to simulate a charge output sensor.
[3] Effective feedback resistance for time constant is 3 times tested value due to circuitry (i.e 1x10E9 = 3x10E9 ohm)
[4] See PCB Declaration of Conformance PS024 for details. A low impendance connection from case to earth ground is required to maintain CE compliance.

Accessories:

選択アクセサリ

ERC-QC	校正証明書

Optional Versions:

No optional versions

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet