393A03 加速度計(加速度センサ) ICP| PCBセンサ・オンラインストア東陽テクニカ

Model: 393A03
Seismic, ceramic shear ICP® accel., 1 V/g, 0.5 to 2k Hz, 2-pin top conn.

■ Specifications

Performance
Sensitivity (±5 %)	102 mV/(m/s²)
Measurement Range	±49 m/s² pk
Frequency Range (±5 %)	0.5 to 2000 Hz
Frequency Range (±10 %)	0.3 to 4000 Hz
Frequency Range (±3 dB)	0.2 to 6000 Hz
Resonant Frequency	≥10000 Hz
Broadband Resolution (1)	0.0001 m/s² rms	[2]
Non-Linearity	≤1 %	[1]
Transverse Sensitivity	≤7 %
Environmental
Overload Limit (Shock)	±49050 m/s² pk
Temperature Range	-54 to +121 °C
Temperature Response	See Graph %/°F
Base Strain Sensitivity	≤0.005 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	<250 Ohm
Output Bias Voltage	8 to 12 VDC
Discharge Time Constant	1 to 3 sec
Settling Time	<15 sec
Spectral Noise (1 Hz)	20 (µm/sec²)/√Hz	[2]
Spectral Noise (10 Hz)	5 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	2 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	1 (µm/sec²)/√Hz	[2]
Electrical Isolation (Case)	≥100000000 Ohm
Physical
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Stainless Steel
Sealing	Hermetic
Size - Hex	30.2 mm
Size - Height	55.6 mm
Weight	210 gm	[2]
Electrical Connector	2-Pin MIL-C-5015
Electrical Connection Position	Top
Mounting Thread	1/4-28 Female
Mounting Torque	3 to 7 Nm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

推奨アクセサリ

選択アクセサリ

080A57	三軸ｱﾀﾞﾌﾟﾀ 1.5"
ACS-QC	校正機器リスト

Optional Versions:

( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

Output Bias Voltage

8.5 to 12.5

■ Documents & Downloads

Product Documents