352A60 | PCB製品・検索見積りサイト東陽テクニカ

Model: 352A60
High frequency, ceramic shear ICP® accel., 10 mV/g, 5 to 60k Hz, 5-44 top conn.

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±15 %)	1.02 mV/(m/s²)
Measurement Range	±4905 m/s² pk	[5]
Frequency Range (±3 dB)	5 to 60000 Hz
Electrical Filter Corner Frequency	45 kHz	[4]
Electrical Filter Roll-off	10 dB/decade	[4]
Resonant Frequency	≥95 kHz
Broadband Resolution (1)	0.02 m/s² rms	[2]
Non-Linearity	≤1 %	[1]
Transverse Sensitivity	≤5 %	[3]
Environmental
Overload Limit (Shock)	±49050 m/s² pk
Temperature Range	-54 to +121 °C
Temperature Response	See Graph %/°F	[2]
Base Strain Sensitivity	≤0.49 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC
Constant Current Excitation	2 to 20 mA	[5]
Output Impedance	≤100 Ohm
Output Bias Voltage	8 to 12 VDC
Discharge Time Constant	0.02 to 0.06 sec	[4]
Spectral Noise (10 Hz)	1570 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	390 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	147 (µm/sec²)/√Hz	[2]
Spectral Noise (10 kHz)	98 (µm/sec²)/√Hz	[2]
Physical
Size - Height	21.6 mm
Size - Hex	3/8 in
Weight	6.0 gm	[2]
Sensing Element	Ceramic
Sensing Geometry	Shear
Housing Material	Stainless Steel
Sealing	Welded Hermetic
Electrical Connector	5-44 Coaxial
Electrical Connection Position	Top
Mounting	Integral Stud
Mounting Thread	10-32 Male

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] Calculated.
[5] >6 mA excitation current required when driving cables longer than 50 ft (15.2 m) to avoid distortion and maintain full range
[6] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

ACS-52	校正データ

推奨アクセサリ

002P10	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ10FT(5-44/BNC)
002P20	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ20FT(5-44/BNC)
002P30	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ30FT(5-44/BNC)
018C10	ﾋﾞﾆｰﾙｹｰﾌﾞﾙ10FT(5-44/BNC)
018C20	ﾋﾞﾆｰﾙｹｰﾌﾞﾙ20FT(5-44/BNC)
018C30	ﾋﾞﾆｰﾙｹｰﾌﾞﾙ30FT(5-44/BNC)
480C02	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
480E09	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ｹﾞｲﾝ付)
482A21	1CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
482C05	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ

選択アクセサリ

ACS-QC	校正機器リスト

Optional Versions:

( A ) Adhesive Mount

Mounting	Adhesive
Mounting Thread	None - Adhesive Mount Only
Size - Height	17.3
Size - Hex	3/8

Accessories:

080A90

Quick Bonding Gel

( M ) Metric Mount

Mounting Thread

M6 x 0.75 Male

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet