東陽テクニカ PCBオンラインストア検索見積
PCBオンラインストア検索見積
PCBセンサ・オンラインストア
PCB社製各種センサを画面左のカテゴリ、もしくは下記の画像から最適なセンサを簡単にお選びいただけます。各センサの推奨アクセサリ等も確認できます。 ご選択いただいたセンサ類はウエブ上で購入していただくこともできます。ぜひご活用ください。

センサとケーブルのセット品でお得!

東陽テクニカ会員特典

会員ログインはこちら
 次回から表示しない
自動見積対象製品
キャンペーン
東陽テクニカ
カテゴリから検索

Model: 3501A2060KG
Shock accelerometer, 60 kg, MEMS sensor installed in chip carrier (SMT)
Price: 見積品


■ Specifications
Performance
Sensitivity (±50 %) (at 10 VDC excitation) .0003 mV/(m/s²) [2]
Sensitivity 0.00003 mV/V/(m/s²) [3]
Measurement Range ±588400 m/s² pk
Frequency Range (1 dB) 0 to 20000 Hz
Resonant Frequency >120 kHz
Damping Ratio 2 % Critical [1]
Non-Linearity (per 10,000 g (98,100 m/s²)) ±1 %
Transverse Sensitivity ≤3 %
Environmental
Overload Limit (Shock) ±980665 m/s² pk [5]
Overload Limit (Mechanical Stops) ≥782534 m/s² pk
Temperature Range (Operating) -54 to 121 °C
Temperature Coefficient of Sensitivity -0.20 %/°C [1]
Zero g Offset Temperature Shift ±10 mV [4]
Base Strain Sensitivity 2.94 (m/s²)/µε [1]
Electrical
Excitation Voltage (Maximum) 15.0 VDC
Current Consumption <3 mA
Input Resistance (±2000 Ohm) 6000 Ohm [2]
Output Resistance (±2000 Ohm) 6000 Ohm [2]
Offset Voltage -40 to +40 mVDC [2]
Settling Time 0.01 sec [6]
Physical
Sensing Element Piezoresistive MEMS
Sensing Geometry Full Active
Housing Material Ceramic
Sealing Epoxy
Size - Height 2.16 mm
Size - Length 6.00 mm
Size - Width 3.50 mm
Weight 0.15 gm [1]
Electrical Connector Solder Tabs
Mounting Surface Mount
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Typical.
[2] Verified with test data provided on supplied calibration certificate.
[3] Sensitivity is proportional to excitation voltage, and at other excitation values, sensitivity can be predicted from the 10VDC calibrated value with a small (<~.5%) increase in uncertainty.
[4] -65 to +250 °F, ref. 75 °F (-54 to +121 °C, ref. 24 °C)
[5] Half-sine pulse duration, >= 20 µsec.
[6] Settling Time is the maximum time after power-up for the Offset Voltage to be within +/-2% of Measurement Range output of the final offset value. Mounting surface must be at thermal equilibrium.
[7] See PCB Declaration of Conformance PS151 for details.
Accessories:
標準付属アクセサリ
ACS-62 校正データ
選択アクセサリ
ACS-QC 校正機器リスト
Optional Versions:
No optional versions

■ Documents & Downloads
Product Documents
本ウェブサイトではサイト利用の利便性向上のために「クッキー」と呼ばれる技術を使用しています。サイトの閲覧を続行されるには、クッキーの使用に同意いただきますようお願いいたします。詳しくはプライバシーポリシーをご覧ください。