320C20 | PCBセンサ・オンラインストア東陽テクニカ

Model: 320C20
ESS (6.5 gm) quartz shear ICP® accel., 10 mV/g, 2 Hz to 10 kHz, 10-32 top conn., 10-32 mtg stud, to +325 F/+163 C

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±10 %)	1.02 mV/(m/s²)
Measurement Range	±4900 m/s² pk
Frequency Range (±5 %)	2.0 to 5000 Hz
Frequency Range (±10 %)	1.5 to 10000 Hz
Filter Type	Low Pass
Electrical Filter Corner Frequency	13 kHz	[2]
Electrical Filter Roll-off	6 dB/octave
Resonant Frequency	≥60 kHz
Broadband Resolution (1)	0.06 m/s² rms	[2]
Non-Linearity	≤1 %	[1]
Transverse Sensitivity	≤5 %	[3]
Environmental
Overload Limit (Shock)	±98100 m/s² pk
Temperature Range (Operating)	-73 to +163 °C
Temperature Response	See Graph %/°F	[2]
Base Strain Sensitivity	≤0.005 (m/s²)/µε	[2]
Electrical
Excitation Voltage	18 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	≤100 Ohm
Output Bias Voltage	8 to 12 VDC
Discharge Time Constant	0.25 to 1 sec
Spectral Noise (1 Hz)	31400 (µm/sec²)/√Hz
Spectral Noise (10 Hz)	5880 (µm/sec²)/√Hz	[2]
Spectral Noise (100 Hz)	980 (µm/sec²)/√Hz	[2]
Spectral Noise (1 kHz)	590 (µm/sec²)/√Hz	[2]
Physical
Size - Height	22.1 mm
Size - Hex	9.7 mm
Weight	6.5 gm	[2]
Sensing Element	Quartz
Sensing Geometry	Shear
Housing Material	Titanium
Sealing	Hermetic
Electrical Connector	10-32 Coaxial Jack
Electrical Connection Position	Top
Mounting Thread	10-32 Male
Mounting Torque	113 to 225 N-cm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] Transverse sensitivity is typically ≤ 3%.
[4] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

080A	接着ﾏｳﾝﾄﾍﾞｰｽ
080A109	ﾍﾟﾄﾛﾜｯｸｽ(試供品 1個入)
ACS-1	校正データ

推奨アクセサリ

002C10	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ10FT(10-32/BNC)
002C20	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ20FT(10-32/BNC)
002C30	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ30FT(10-32/BNC)
080A179	強力磁石ﾏｳﾝﾄﾍﾞｰｽ
482C05	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
482C15	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ｹﾞｲﾝ付）
482C16	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(可変ｹﾞｲﾝ付）

選択アクセサリ

080B10	三軸ｱﾀﾞﾌﾟﾀ0.87"
080A24	ﾍﾟﾄﾛﾜｯｸｽ(4個入)
ACS-QC	校正機器リスト

Optional Versions:

( M ) Metric Mount

Mounting Thread

M6 x 0.75 Male

Accessories:

M080A

Metric adhesive mounting base, 0.5" hex x 0.187" thick, M6 x 0.75 tapped thru-hole

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet