112A21 | PCBセンサ・オンラインストア東陽テクニカ

Model: 112A21
High resolution ICP® pressure probe, 100 psi, 50 mV/psi, 0.218" dia. diaphragm, accel. comp.

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Measurement Range (for ±5V output)	690 kPa
Useful Overrange (for ± 10V output)	1380 kPa	[3]
Sensitivity (±10 mV/psi)	7.25 mV/kPa
Maximum Pressure (step)	6895 kPa
Maximum Pressure (Total)	103421 kPa
Resolution	0.0028 kPa	[2]
Resonant Frequency	≥250 kHz
Rise Time (Reflected)	≤2.0 µ sec
Low Frequency Response (-5 %)	0.5 Hz
Non-Linearity	≤1.0 % FS	[1]
Environmental
Acceleration Sensitivity	≤0.0014 kPa/(m/s²)
Temperature Range (Operating)	-73 to +135 °C
Temperature Coefficient of Sensitivity	≤0.108 %/°C
Maximum Flash Temperature	1650 °C
Maximum Vibration	19613 m/s² pk
Maximum Shock	196133 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive
Discharge Time Constant (at room temp)	≥1.0 sec
Excitation Voltage	22 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	<100 Ohm
Output Bias Voltage	8 to 14 VDC
Physical
Sensing Geometry	Compression
Sensing Element	Quartz
Housing Material	17-4 Stainless Steel
Diaphragm	Invar
Sealing	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack
Weight (with clamp nut)	6.0 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical value.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.
[4] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

060A03	ｸﾗﾝﾌﾟﾅｯﾄ(5/16-24)
060A05	ｸﾗﾝﾌﾟﾅｯﾄ(M7)
065A02	ｼｰﾙﾘﾝｸﾞ
065A05	ｼｰﾙｽﾘｰﾌﾞ

推奨アクセサリ

002C10	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ10FT(10-32/BNC)
002C20	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ20FT(10-32/BNC)
002C30	ﾃﾌﾛﾝ白ｹｰﾌﾞﾙ30FT(10-32/BNC)
480C02	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
480E09	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ｹﾞｲﾝ付)
482A21	1CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
482C05	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ

選択アクセサリ

PCS-QC	校正証明書

Optional Versions:

( E ) Emralon coating

Coating	Emralon
Electrical Isolation	100000000 Ohm

Accessories:

065A08	Isolation ring 0.250"OD x 0.218" ID x 0.027" thk anodized aluminum
065A22	Isolation Seal, .250" OD x .218" ID x .015", Torlon or Vespel

( J ) Ground Isolated

( S ) Stainless Steel Diaphragm

Diaphragm

316L Stainless Steel

( W ) Water Resistant Cable

Accessories:

060A03

Clamp nut, 5/16-24-2A thd, 1/4" hex, stainless steel

( WM ) Water Resistant Cable

Accessories:

060A05

Clamp nut M7 x 0.75-6g thd

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet