106B 圧力センサ ICP| PCBセンサ・オンラインストア東陽テクニカ

Model: 106B
ICP® Acoustic Pressure Sensor, 300 mV/psi, resolution 0.0001 psi (+91 dB), accel. comp.

■ Specifications

Performance
Measurement Range (for ±2.5V output)	57.2 kPa
Sensitivity (±15 %)	43.5 mV/kPa
Maximum Pressure (step)	1379 kPa
Maximum Pressure	13790 kPa
Resolution	0.00069 kPa	[2]
Resonant Frequency	≥60 kHz
Rise Time	≤9 µ sec
Low Frequency Response (-5 %)	0.5 Hz
Non-Linearity	≤1 % FS	[1]
Environmental
Acceleration Sensitivity	≤0.0014 kPa/(m/s²)
Temperature Range (Operating)	-54 to +121 °C
Temperature Coefficient of Sensitivity	≤0.09 %/°C
Maximum Flash Temperature	1649 °C
Maximum Shock	19600 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive
Discharge Time Constant (at room temp)	≥1 sec
Excitation Voltage	12 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	≤100 Ohm
Output Bias Voltage	3 to 8 VDC
Physical
Sensing Geometry	Compression
Sensing Element	Quartz
Housing Material	304/304L Stainless Steel
Diaphragm	316L Stainless Steel
Sealing	Welded Hermetic
Electrical Connector	10-32 Coaxial Jack
Weight	18.0 gm

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] See PCB Declaration of Conformance PS023 for details.

Accessories:

標準付属アクセサリ

推奨アクセサリ

選択アクセサリ

PCS-QC	校正証明書

Optional Versions:

( E ) Emralon coating

Coating	Emralon
Electrical Isolation	100000000 Ohm

Accessories:

065A47

Seal ring 0.497 OD x 0.437 ID x 0.025 thk Acetal

( J ) Ground Isolated

Electrical Isolation (50 V)

100000000 Ohm

( T ) TEDS Capable of Digital Memory and Communication Compliant with IEEE P1451.4

Output Bias Voltage

3.7 to 8.7 VDC

( W ) Water Resistant Cable

Accessories:

060A12

Clamp nut, 9/16-18-2A thd, 9/16" hex

( WM ) Water Resistant Cable

Accessories:

060A14

Metric clamp nut, M14 x 1.25-6g thd, 14 mm hex, stainless steel

■ Documents & Downloads

Product Documents