086E80 | PCBセンサ・オンラインストア東陽テクニカ

Model: 086E80
Miniature Instrumented Impulse Hammer, 0 to 50 lbf

Specifications
アクセサリ
Product Documents

■ Specifications

Performance
Sensitivity (±20 %)	22.5 mV/N	[2]
Measurement Range	222 N pk
Resonant Frequency	≥100 kHz
Non-Linearity	≤1 %	[1]
Electrical
Excitation Voltage	20 to 30 VDC
Constant Current Excitation	2 to 20 mA
Output Impedance	<100 Ohm
Output Bias Voltage	8 to 14 VDC
Discharge Time Constant	≥100 sec	[1]
Physical
Sensing Element	Quartz
Sealing	Epoxy
Hammer Mass	4.8 gm	[3]
Head Diameter	6.3 mm
Tip Diameter	2.5 mm
Hammer Length	107 mm	[3]
Electrical Connection Position	Side
Extender Mass Weight	1.25 gm
Electrical Connector	5-44 Coaxial	[4]

All specifications are at room temperature unless otherwise specified.

Product Notes

[1] Typical.
[2] Steel tip with no extender mass.
[3] With plastic handle attached.
[4] With aluminum handle attached.
[5] See PCB Declaration of Conformance PS136 for details.

Accessories:

標準付属アクセサリ

001A20	ｹｰｽ
018G10	ﾋﾞﾆｰﾙｹｰﾌﾞﾙ10FT(5-44/10-32)
080A109	ﾍﾟﾄﾛﾜｯｸｽ(試供品 1個入)
084A13	ｴｸｽﾃﾝﾀﾞﾏｽ
084A14	ﾌﾟﾗｽﾁｯｸﾊﾝﾄﾞﾙ
084A17	ｱﾙﾐﾊﾝﾄﾞﾙ
084A28	ﾋﾞﾆｰﾙｷｬｯﾌﾟ
HCS-2	校正データ

推奨アクセサリ

070A02	10-32J/BNCP ｺﾈｸﾀ
480C02	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
480E09	ICP電池式ｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ(ｹﾞｲﾝ付)
482A21	1CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ
482C05	4CHｼｸﾞﾅﾙｺﾝﾃﾞｨｼｮﾅ

選択アクセサリ

080A24	ﾍﾟﾄﾛﾜｯｸｽ(4個入)
ACS-QC	校正機器リスト

Optional Versions:

No optional versions

■ Documents & Downloads

Product Documents

● Product Manual

● Product Specification Sheet