TOYO

GLOBAL SALES
JAPANESE

Advantages of TOYO Fuel Cell Test System

tai_adv.gif
Reliable Test System
TOYO Fuel Cell test system is designed based onwide experience and know-how in development and sales. You can start your desired tests right after a system installation.
 
User-Friendly Software
Gas supply control, load control, impedance measurement, and data acquisition are feasible by integrated software. These functions can be operated by the software sequence control function.
     
Accurate Dew Point Control
Dew point is guaranteed ±1℃ to SP at FC inlet point. Dew point inspection data are attached to all test systems as standard.
 
Satisfactory Support
TOYO supplies a total solution including various components: loads, gas supply systems, software, fuel cells for experiments and electrochemical measurement instruments.
     
Use of electronic load for PEFC
TOYO test system uses Scribner 890 series electronic load. The 890 supports the current interrupt iR measurement function and the impedance measurement function (option).
 
 
Abundant Options
We have wide variety of options related to impedance measurement and electrochemical measurement with potentio-/galvano-stat.
AutoPEN series
AutoPEM series
Full automatic operation with “TFT” software Rich options for various purposes
 
Features
■Accurate dew point control: guaranteeing ±1 ℃ to SP at FC inlet point
■PEFC and DMFC tests with one test system (AutoPEM-dual)
■Use of Scribner 890e series electronic load
(Current interrupt iR measurement, impedance measurement (option), voltage measurement terminal for reference electrode)
■Automatic operation with the automatic water supply/drain function
■Automatic back pressure control (option)
■Gas flow rate control with constant stoichiometry function
■Compact rack
■Expandability for multi channels
■Various options and custom models available
 
 
PEMTest8900.gif
PEMTest8900 series
High cost-effectiveness 
High accuracy & High functionality
 
Features
■Accurate dew point control: guaranteeing ±1 ℃ to SP at FC inlet point
■2 models: PEMTest8900 and PEMTest8900DM (only for DM test)
■Use of Scribner 890e series electronic load
(Current interrupt iR measurement, impedance measurement (option), voltage measurement terminal for reference electrode)
■Gas flow rate control with constant stoichiometry function
■Compact rack
■Automatic sequence test with “FuelCell” software
■PEFC and DMFC tests with methanol supply unit (option)
– available only in PEMTest8900
■Short lead time
 
AutoSOFC2 series
AutoSOFC2 series
Smart solution for SOFC measurement Automatic current interrupt iR measurement and impedance measurement
 
Features
■Automatic test system for SOFC performance test and endurance test
■Integrated management of operating and data acquisition with “TFT”
■Reformate simulation function
■Accurate dew point control: guaranteeing ±1 ℃ to SP at FC inlet point
■Use of Scribner 890ZV series electronic load
(Current interrupt iR measurement, impedance measurement (option), voltage measurement terminal for reference electrode)
■High temperature sample holder for coin type cell
■Gas flow rate control with constant stoichiometry function
■ Various options and custom models available
 
 
NorECs Probostar
High Temperature Test System
 
Features
■Temperature: <1400℃(typical long term), <1600℃(short term)
■For SOFC tests under high temperature and gas flow rate controlled
condition
■Applicable to impedance measurement, I-V measurement and Seebeck coefficient measurement
■Applicable to electric characteristics evaluation of liquid sample at high temperature (up to 1000℃)
■Supply of humidified gas (dew point: 40 – 80℃) as an option
■Combined with electric furnace as an option

PAGE TOP